ALL STATES & TERRITORIES
Clutch update kit for the AD230. Designed to improve clutch longevity and make calibration easier. The kit includes a redesigned clutch slide with...
View full detailsSKF Carbon steel drive chain. Comes in a 3m length. Half link or joiner links may be required.Some sprocket drive assemblies also utilise an 08B du...
View full detailsSimplex sprocket, suits 08B chain with 21 teeth. Sprocket secures with grub screws to a 25.4mm shaft. Old Part No. 113-451 Model SKU: 113-4051; Cha...
View full detailsJoiner link to suit chain 08B. Also see half link 115-7010. *Old Part No. 115-711
This is a roller component in the clutch assembly. It is machined out of 65mm diameter self-lubricated engineering plastic and has an overall lengt...
View full detailsFarmscan area meter sensor. Includes packard connection wth tail and mounting bracket. *Old Part No. 114-463
Sprocked that transfers between two 08B chains. Fits a 25.4mm shaft. Comes with bearing 138-4020. Old Part No. 124-401 Model SKU: 124-4001; Chain:...
View full detailsSprocket assembly comes with bearing insert (138-4020). Fits on 25.4mm shaft. Sprocket transfers from 08B chain to 10B chain. Old Part No. 113-357...
View full detailsCalibration crank handle. Suits the older-style seed drills. Fits over a 20mm shaft with 3mm key way.
Half link to suit chain 08B. Also see joiner link 115-7011. *Old Part No. 115-710
Transfers 08B chain between 21 and 32 teeth. Fits on a 50mm shaft. Sprocket assembly comes with bearing 138-4050 fitted. Old Part No. 124-499 Model...
View full detailsThis spherical bearing suits a 25.4mm shaft, and fits into 52mm spherical bearing housing. The two common housings used to secure this bearing on t...
View full detailsCalibration crank handle. Suits most seed drills including the AD95, AD720, AD120, JPC2000, DF1000. Fits over a 25.4mm shaft with 3mm key way. Old ...
View full detailsChain tensioner made in engineering plastic, outer diameter 30mm, 50mm long. Supplied with nut to secure in drive assembly. *Old Part No. 124-485
Fabricated fixed idler sprocket. Suits 08B chain with two 21 tooth sprockets. Sprockets secure with grub screws to a 25.4mm shaft.
Simplex sprocket, suits 08B chain with 21 teeth. Sprocket secures with grub screws to a 20mm shaft. Old Part No. 115-420 Model SKU: 115-4020; Chain...
View full detailsThis spherical bearing suits a 20mm shaft, and fits into 47mm spherical bearing housing. The two common housings used to secure this bearing on the...
View full detailsChain tensioner made in engineering plastic, outer diameter 30mm, 75mm long. Supplied with nut to secure in drive assembly.
The varibox is a self-contained gearing system that allows an Agrowdrill operator to have greater control over the flow of seed through the main se...
View full detailsSKF Carbon steel drive chain. Comes in a 3m length. ANSI Chain Size: 08B-2 Strands: Single Pitch (mm): 12.7 or 1/2" A single 08B chain can be fou...
View full detailsThis clutch chain guide is 40mm long, made out of 50mm OD nylon and has a 9mm hole drilled through the centre. Alternate Part No.385-480
Chain tensioner made in engineering plastic, outer diameter 30mm, 50mm long. Equivalent Part No. 124-4085
Chain tensioner made in engineering plastic, outer diameter 50mm, 40mm long. Supplied with nut to secure in drive assembly. *Old Part No. 124-484
Simplex sprocket, suits 08B chan with 30 teeth. Sprocket secures to a 50mm shaft with both key way (14mm) and grub screws (M8). This part supersede...
View full detailsSimplex sprocket, suits 08B chain with 14 teeth. Sprocket secures with grub screws to a 25mm shaft. Suits ADx30 series Agrowdrills. Model SKU: 115-...
View full detailsFarmscan shaft magnet. *Old Part No. 114-484
Sprocket assembly to transfer 08B chain between 21 and 46 teeth. Fits on 50mm shaft. Comes standard with bearing inserted (138-4050). *Old Part No....
View full detailsSprocket assembly to transfer 10B chain between 21 and 36 teeth. Fits on a 50mm shaft. Sprocket assembly comes with bearing 138-4050 fitted. Old Pa...
View full detailsChain Tensioner Block made out of 50mm engineering plastic and tapped with a M10 hole
Simplex sprocket, suits 08B chain with 60 teeth. Sprocket fits to a 20mm shaft and secures with grub screws.
Simplex sprocket, suits 08B chain with 24 teeth. Sprocket secures on a 20mm shaft with grub screws. Model SKU: 630-4110; Chain: 08B; Teeth: 24; Sha...
View full detailsThe clutch pull set are part of the AD230 clutch pull and lever assembly. Comes with a nylon fork to align the clutch pull with the channel in the ...
View full detailsChain tensioner made in engineering plastic, outer diameter 30mm, 55mm long. Supplied with nut to secure in drive assembly.
Clutch slide, fitted with roll pins and grease nipple. This component fits in the AD230 and AD730 clutch assembly.
Simplex sprocket, suits 08B chain with 15 teeth. Sprocket secures with grub screws to a 25mm shaft. Suits the JPC2000.
Sprocket with 30 and 36 teeth that suits the DF1000. Includes bearing 138-4051.
Mild steel welded part. Chain tensioner used in seed drill drive assemblies to secure the nylon chain tensioner in position.
Welded assembly for the AD720 and AD120 seed drill drive, secures to the varibox. *Old Part No. 124-447
Clutch slide, fitted with roll pins and grease nipple. This component fits in the AD230 and AD730 clutch assembly. This part supersedes 640-4077. I...
View full detailsSupplied with bearing 138-4020.
Sprocket clutch 30/21T with bearing 138-1100.
The varibox is a self-contained gearing system that allows an Agrowdrill operator to have greater control over the flow of seed through the main se...
View full details35mm shaft. Hub, 107.9mm PCD with 5 studs. For the full assembly including castle nut and hub cap see part 161-0004. This component is the hub with...
View full detailsTension spring used in the current AD140 drive assembly. It is made out of 6.3mm Wire Gal, has an OD of 59mm and has around 28 total coils. This sp...
View full detailsChain tensioner made in engineering plastic, outer diameter 40mm, 105mm long.